Who Repairs Sliding Patio Doors?
The sliding glass doors in your home are a great feature. They provide more lighting and ventilation while also improving the overall appearance of your living space.
Maintaining your sliding door is essential. This includes regular cleaning and lubrication. However, if your sliding door is experiencing problems that are serious it is recommended to leave this project to the experts.
Glass Replacement
Sliding glass doors are a wonderful addition to any home. They let you enjoy your backyard while letting natural light into your home. As time passes, they could begin to show signs they are worn out. They might be difficult to slide through, or break. This is why it is crucial to get your sliding door repaired immediately you spot issues. If you require the rollers of your sliding patio door repair ed or the glass replaced or replaced, your local handyman will help.
Replacing the glass on the sliding patio door is a relatively simple process. But, you'll require some tools and the right set of instructions to complete the task correctly. Remove all plants and debris before you start. This will allow you to avoid damaging the glass.
Based on the type of patio door you have it is essential to select the appropriate kind of replacement glass. There are a variety of different glass options, such as double-pane windows, which offer greater energy efficiency and increased privacy. You can also select decorative glass options that will complement your existing style.
In some instances, you might only have to replace the interior glass panes of your sliding patio door. For example, if you have dual pane glass insulated units (IGU's), and there is moisture between the two glass panes, this means that the seals are likely to be damaged or worn out. In this case the two panes of glass must be replaced to ensure proper seal.
Remember that replacing a single glass panel on your sliding patio door is a distinct task than replacing the entire door. The frame and rollers are the two components that make the sliding door functional. They should be removed and then put back in place with care to ensure that the new glass is put in place properly. If you attempt to install the glass pane in a new location without first reinstalling the frame and rollers then it is likely that your patio door will be unstable or unbalanced and could eventually crack or break.
Roller Replacement
If your sliding patio door is sticking or isn't opening and closing smoothly, it might be the time to replace your rollers. After years of hard use, the rollers may become clogged with dirt and grime, and stop moving smoothly. Sometimes some lubrication can help, but if that does not solve the issue it's time to replace the rollers.
Start by unwinding the screws that hold the old rollers in place. Both sides of the door will need to be removed. After the rollers have been removed, you are able to remove them from the door. Save the screws so you can put in the new rollers later on.
Hardware stores and lumberyards offer replacement sliding door rollers. They are cheap and easy to install. Select a ball bearing steel roller that fits the size of your door or a tandem wheel for large doors. If you have aluminum siding, consider using a nylon roller instead of steel for more durability.
Before installing the new rollers, clean the track. Apply a thin layer oil using an odorless spray can or a lithium grease spray to the tracks, guide rails and rollers. A silicone-based lubricant is more effective than petroleum-based lubricants as it doesn't attract dirt and grime as easily.
The sliding patio door systems are a major part of the home and, when there's problems with the rollers or they get stuck, it could be a security risk. By addressing the issue of damaged or worn out rollers, you can ensure that your sliding patio doors are operating perfectly for their long life duration.
Weatherstripping Replacement
A sliding patio door might appear tight when you open it but the seals begin to weaken over time, allowing in drafts, light and inclement weather. It's time to change your weather stripping, especially if you have to turn up the thermostat in order for you to avoid an annoying draft, or if you notice condensation on glass panes. The good news is that you don't have to hire a professional to install it, if you use the right type of weatherstripping, this is an easy DIY project you can finish in just a few minutes.
To begin, look for gaps at the top and bottom of your patio doors where they join their frames. A tiny gap could let a lot of air to move between the inside and outside of your house, driving up your energy bills by 10 percent or more, according to Bob Vila. It is also important to check the weatherstripping to see if it has any damage, like cracks or missing pieces that allow cold air to enter and dust.
The most common type of weatherstripping that is used for sliding patio doors is fin-seal. It's made of a strip of Mylar with bristles that be bent back and forth in accordance depending on the movement of your door. It's available in a variety of lengths that can be used to fit various windows and doors, and it can be purchased online or at many home improvement stores. To install it, you'll require an hammer and screwdriver as well as hooks and picks, as well as a putty blade.
If your doors aren't old enough, you'll also need tools to remove the lock cylinders. After loosening the screws, you'll have to lift the door out of the track (get help if necessary) and then set it on a pair of sawhorses or any other support. Take off the headstop and any screws that are holding the door in place.
After you have removed the door, use your putty blade to scrape away any old weatherstripping. Cut a piece of new weatherstripping with a utility blade leaving a bit to use to make future repairs. Install the seals on the frame of a new patio before reinstalling it.
Frame Replacement
Sometimes, the frame of your sliding patio door could need to be replaced, because it may be damaged or discolored over time. It can be a simple fix, or a new frame may be needed to accommodate a bigger glass surface or a different style of sliding patio door. You'll want to choose a sturdy, attractive frame if you are replacing or repairing the current one. Sliding patio door frames are available in a non-maintenance white color, as well as an tan which is primed for staining or painting to match your home's exterior.
Another issue common to sliding patio doors is that the frame of the screen can become bent or damaged as time passes. You'll need to replace your screen door frame with one that's in line with the dimensions of your patio door in this situation. There are several different types of screen door frames are available that include extruded and roll-formed designs. An extruded screen door frame is more expensive, however it has greater strength and durability than a roll-formed door.
The sliding screen door rollers may be worn out over time, which could cause the door to stick or becoming stuck. You can easily replace them with new rollers purchased at a hardware shop. Also, you should examine the rollers to determine whether you require replacing them.
Replace the existing frame on your sliding patio door to enhance its appearance or increase the efficiency of your energy usage. This is a more cost-effective solution than simply replacing the glass or doors. If you opt to replace the entire door, it's important to measure the height and width of your current opening to ensure you're getting a suitable replacement. You'll also want to ensure that your frame is level and square before installing it. It's a good idea to employ a spirit level to test this. Install the new door and frame following the manufacturer's instructions and the materials.